COBAdot
COBAdot è un rivestimento per pavimenti in gomma naturale/sintetica (naturale/NBR nella versione Nitrile) con superficie a rilievo dot, in rotoli da 120 cm x 10 m, spessore 3 o 4,5 mm. Classificazione antiscivolo 3, resistenza all'usura 3, antifatica 1; resiste ad acidi deboli e alcali. Destinato a passerelle in ambienti interni asciutti, posato o saldato al pavimento.
- From:
- 47,50 €
- Delivery:
- 5 working days production + 7 shipping
- Warranty:
- Durata: 2 anni dalla data di acquisto · Proprietà materiali: garantiti contro difetti di fabbricazione · Condizioni: uso conforme alle istruzioni di manutenzione · Gestione: contattare l'assistenza con prova d'acquisto
- Name:
- COBAdot
- Category:
- Rubber floor covering
- Surface finish:
- Raised stud (dot)
- Surface type:
- Solid
- Composition:
- Natural/synthetic rubber (standard); Natural rubber/NBR (Nitrile version)
- Thickness:
- 3 mm / 4.5 mm
- Fire behaviour:
- Not specified in the available sources
- Slip resistance:
- Slip resistance rating 3
- Wear resistance:
- Good – wear resistance rating 3
- Chemical resistance:
- Resistant to weak acids and alkalis
- Application:
- Dry indoor areas; typical applications: walkways
- Widths:
- 120 cm
- Roll length:
- 10 m
- Standard sizes:
- 120×3 cm, 120×4.5 cm, 120×10 cm
- Country of origin:
- CN / AE
- Anti-fatigue:
- Anti-fatigue rating 1
- Operating temperature:
- -30°C to +70°C
- Key benefit:
- Reduced slipping
- Installation:
- Loose laid or welded to the floor surface
- Format:
- Rolls
Frequently asked questions
Can COBAdot be used in damp or wet areas, for example near wash-down zones?
No, COBAdot is designed for dry environments only. It is not suitable for surfaces exposed to water, moisture or liquids: in these conditions the slip-resistant performance cannot be guaranteed and the product may deteriorate prematurely.
How is COBAdot installed? Do I need specialist staff or special equipment?
Installation is straightforward and requires no special equipment: COBAdot can be loose laid on the floor or bonded down, depending on your requirements. Both methods can be carried out by in-house staff, with no need for specialist fitters.
Are bespoke sizes available in addition to the standard widths?
COBAdot is supplied in rolls 120 cm wide, available in 3, 4.5 and 10 cm heights. The roll format means the material can be cut to the exact size required, adapting easily to large areas or awkward shapes and keeping waste to a minimum. For specific requirements, please get in touch with us directly.
How should COBAdot be cleaned and maintained over time?
For routine cleaning, simply sweep or vacuum regularly to remove dust and debris. For a deeper clean, wash with water and a neutral detergent, avoiding solvents or aggressive products that could damage the surface. Always make sure the matting is completely dry before the area is put back into use.
Is COBAdot suitable for workstations where operators stand for long periods?
COBAdot has a Class 1 anti-fatigue rating, providing a basic level of comfort for standing workstations. It is a good choice if your main priority is slip resistance with a degree of ergonomic support; if you need high-level anti-fatigue comfort, please contact us so we can recommend a more specialised alternative.